# UAV Concept V1 - Calculations and Design Notes ## 1. Mian Dimensions |Parameter | Value| |Wingspan | 1900mm| |UAV Length, nose to Propellor | 1280 mm| |Wing chord | 190 mm| |Maximum fuselage height without antenna/fin | 200 mm| |Maximum total height | 419.52 mm| |Total angle | 22.5°| |Wing reference angle | 6.3| |Payload mount angle | 60°| ## 2. Aircraft Configuration -Fixed-wing UAV concept -Constant-chord wing -Rear pusher propeller -V-tail -Nose Sensor turret -Underwing Payload mounts -Intended role: surveillance/ Reconnaissance UAV concept ## Wing Area Calculation Formula: Wing Area = Wingspan x Wing chord Given: Wingspan = 1900 mm Wing Chord =190 mm Wing Area = 1900 x 190 mm Wing Area = 361000 mm^2 Convert to m^2 Wing Area = 0.361 m^2 ## Aspect Ratio Calculation Formula: Aspect ratio + Wingspan^2 / Wing Area Using meters: Wingspan = 1.9m Wing Area = 0.361 m^2 Aspect Ratio = (1.9 x 1.9)/0.361 Aspect Ratio = 3.61/0.361 Aspect Ratio == 10 -------------------------> { Aircraft Type| Aspect Ratio} Fighter Jet | 2-4 General Aviation | 6-8 UAV/Reaper Type | 10-15 Glider | 20-30 } Aircraft Type:- Long-endurance UAV ## Notes on propellor Size The Current CAD propellor radius IS 7.7 mm, giving a diameter of 15.4mm. This is not realistic for a UAV with a 1900 mm wingspan The Value should be treated as a visual CAD placeholder only. Real propellor diameter = TBD after motor selection. ## Design Interpretation The aspect ratio of approximately 10 indicates a long and narrow wing configuration. This is suitable for: -Better lift-to-drag ratio -Efficient Cruise flight -Surveillance missions -Endurance-Oriented UAV design This is less suitable for: -High-Speed maneuvering -Aggressive aerobatics -Heavy payload missions without structural reinforcement.